Leading Concrete Protection Systems …

Densi Crete helps save time and money at the Titan’s training facility

Titans Training

The best way to show you why Duracore's Densi Crete is one of the best concrete waterproofing and protection products available, is to show you how it helped others who have used our products on their projects.

Here's how Masseal Waterproofing saved time and money waterproofing the Titans Training Facility at Skilled Park:


Project Details
Builder: Masseal Waterproofing
Project: Skilled Park, Titan's Training Facility
Product: Densi Crete technology to cure, seal and waterproof
Area: 2,800m2 basement car park slab below the water table, and structural slab below the swimming pool.
Other: Used in conjunction with "Liquid Rubber" membrane and "Chemind" waterproofing products

According to Paul Calin, the manager of Masseal Waterproofing:

"Since I've used Duracore's Densi Crete, I've never had a failure or problem at all with moisture-related issues, and now use the product on every installation as a moisture barrier or as an additional safeguard under all coatings and membranes, just in case of damage that may occur to the topical coating.”

Since experiencing Densi Crete’s effectiveness, Paul has used it on walls, lift shafts, roof decks, and slabs that are below ground, which means that they are subject to hydrostatic pressure, with complete success.

Paul goes on to say that "The ability to use Densi Crete at the time of pour as permanent waterproofing and as an excellent curing medium is a major bonus. Along with that, it also eliminates surface cracking, densifies and hardens the concrete without any extra preparation cost. This saves us a lot of time and money and allows us early site access."

Paul has told us that his customers are incredibly satisfied with the performance and results that Densi Crete provides, and that it’s been specified more and more by various other builders for their projects.

Why Densi Crete is so effective:

  • It can be applied to almost any concrete product containing 10% Portland cement.
  • It is easy to apply and can be sprayed on to existing concrete or concrete at time of pour.
  • After applying Densi Crete the surface is foot trafficable after just 1 hour.
  • It accepts coverings within 24 hours of application to exisitng concrete or within 14 days of application if used at time of pour.
  • It is more than 21% cheaper than other waterproofing membrane methods.

For more information about DuraCore’s range of excellent products, please feel free to call 1300 044 625 or visit www.duracore.com.au. Alternatively, to find your nearest distributor please click here.

Contact Us

Contact us


Copy Scape